HONDA unveils RC212V – 2007 MotoGP machine
from Motorcycles (340 articles)
Page: 1 2
Click image to enlarge
Image Gallery ( 9 images )December 7, 2006 Having wrestled the World MotoGP Riders and Manufacturers Championships away from Valentino Rossi and Yamaha, Honda’s next big challenge is to keep them and next year with the rules changing to an 800cc limit, suddenly everything is up for grabs again and in post-season testing of the new 800 machines Honda, Yamaha, Ducati and Suzuki have all shown they will have competitive machinery next year . We’ve already done a complete technical rundown (with pics) of the RC211V 1000cc MotoGP bike which Honda is leaving behind – herewith is the official Honda unveiling of its 800cc, V4 replacement with a stunning all-new chassis built with mass centralization and ultimate handling in mind. Welcome to the future…
Takanori Okuma, the Honda R&D RC212V Large Project Leader, explains the principles behind the RC212V: “When we started development of the 800cc machine, effectively the "second generation" of Honda MotoGP bike, we gave top priority to the pursuit of excellent handling and drivability. For the newly-reduced engine capacity of 800cc, we decided a V4 was the most efficient layout. Rather than focusing solely on top end power, we also concentrated on producing good power delivery characteristics, which can have a significant effect on lap times. Using enhanced control systems, the result is an engine with good drivability in the low and mid ranges, and excellent power under acceleration when the engine is at the top of its range.
“On the chassis side, we further enhanced the "mass concentration" package developed for the RC211V to improve the agility and quick handling characteristics of the bike. The outward appearance is aggressive and appropriately innovative for a new generation of bike, affording both drivability and aerodynamic efficiency. We will continue to evolve the bike before the season opener and throughout next season.”
Technical Specifications
Overall length : 2050mm Overall width : 645mm Overall height : 1125mm Wheelbase : 1440mm Road clearance : 125mm Weight (kg) : over 148kg Engine type: liquid-cooled four-stroke DOHC 4 valve V-4 Displacement : 800cc Maximum power : N/A Frame type : twin-tube Front Wheels (inch) : 16.5 Rear Wheels (inch) : 16.5 Front Suspension : Telescopic fork Rear Suspension : New Unit Pro-link Fuel tank capacity : 21 litre
Dani Pedrosa’s first impressions Of The RC212V
Following the Grand Prix of Japan at Motegi in September, Dani Pedrosa rode 30 laps on the RC212V prototype as the machine was revealed for the first time in public. Though the test was primarily for initial evaluation purposes, Pedrosa managed a highly respectable lap time of 1m 48.210s. Here he gives his thoughts on the bike he and newly-crowned World Champion Nicky Hayden will ride next year.
What are your first impressions of the RC212V prototype?
It’s a little bit difficult to make a good analysis of the bike because I’ve only had the possibility to ride a few laps. But my first impression is that the bike feels right which is very important when you check the first prototype. We didn’t work on the settings – only making some changes to the gearing – but but it was clear that the package feels quite similar to the RC211V.
Page: 1 2
Gallery Images
Share this article
